Central offices and equipment rooms
Organize high-capacity termination, cross-connection and patching with defined service access.
Dual-End Fiber Optic Splice Closure protects optical cable joints, splice storage and route branching in a Polymer-modified plastic enclosure for maintainable fiber-network deployment.
A 490 × 200 × 120 mm body weighs 3.5–4.0 kg in the source. Four 10–18 mm cable ports and up to three 24-core trays are described, with mechanical sealing and nut-compression cable entries.
The Dual-End Fiber Optic Splice Closure provides a 72-fiber splice arrangement with cable access at both ends. Its perimeter snap latches and separable nuts are intended to support repeated opening and cable-seal installation without relying on enclosure screws.
Check latch access and the cable-preparation plan at both ends. Identify the installed trays and blank ports, then select support parts for aerial or duct deployment.
Huijue Group can assess OEM dual-end boxes, private-label serial marking and sample/drawing-based nut or bracket interfaces. Mold feasibility, tooling, resealing tests, quantities and delivery scope require confirmation.
Provide end-to-end cable paths, diameters, tray population, mounting method and re-entry needs.
| Box Material | Polymer Modified Plastic | Overall Dimensions (mm) | 490×200×120 | ||||||
| Sealing Material | Non-vulcanized Self-adhesive Rubber | Weight (kg) | 3.5-4.0 | ||||||
| Standard Accessories | |||||||||
| Serial No. | Name | Unit | Quantity | Serial No. | Name | Unit | Quantity | ||
| 1 | Box Body | Set | 1 | 7 | Baffle | Set | 1 | ||
| 2 | Sealing Component | Set | 1 | 8 | Cable Tie | Set | 1 | ||
| 3 | Wall-mounted Bracket | Set | 1 | 9 | Wet Wipe | Pack | 1 | ||
| 4 | Fusion Splicing Protection Tube | Piece/Tray | 24 | 10 | Special Wrench | Piece | 1 | ||
| 5 | Plug | Set | 1 | 11 | Fiber Protection Hose | Piece | 1 | ||
| 6 | Insulating Tape | Roll | 1 | ||||||
| Optional Accessories | |||||||||
| Serial No. | Name | Unit | Quantity | Serial No. | Name | Unit | Quantity | ||
| 1 | Air Nozzle | Set | 1 | 2 | Overhead Mounting Kit | Set | 1 | ||
Aerial and duct cable-joint locations requiring end-to-end routing and a re-enterable 72-core single-fiber configuration.
No numerical IP rating is established in this record. State the required enclosure test and service exposure explicitly.
Buyer Questions
Answers specific to Dual-End Fiber Optic Splice Closure selection, configuration and purchasing.
No numerical IP value is specified here. Confirm the rating and test conditions required for the supplied assembly.
Up to three 24-core trays and seventy-two fibers are described. Confirm the populated trays and sleeves.
They affect cable preparation, seal fitting and maintenance access. Match them to the actual cable sizes.
Use the deployment context to narrow the configuration before comparing dimensions, capacities and options.
Organize high-capacity termination, cross-connection and patching with defined service access.
Place splitter, terminal and distribution boxes at the correct feeder-to-drop transition.
Protect branching and splicing around cable entries, sealing, tray capacity and mounting method.
Reserve fibers, ports and internal routing space for staged subscriber or backbone growth.
Before quotation: confirm capacity, interfaces, installation environment, power conditions, quantity and required options.