Passive optical distribution
Match splitter or WDM architecture to wavelength plan, ratio, package and insertion-loss targets.
Connectorized outdoor multi-core cable assemblies with reinforced construction for exposed routes, available in several strength-member and fiber configurations.
Outdoor Multifiber Pigtail Cable Assemblies combine a multi-core outdoor cable structure with connectorized tails for field equipment or enclosure entry. The listed GYFTA constructions arrange several single-core elements around a central strength member and may use water-blocking yarn, aluminum-tape reinforcement and an outer sheath.
The product name describes its intended outdoor role, but the cable assembly is not assigned an enclosure IP rating in the current data. Connector sealing, gland design and cabinet entry must therefore be specified as part of the complete installation.
Select the exact GYFTA model from fiber count, cable diameter, central strength member and mechanical load. Then specify connector type, polish, fan-out design, length and equipment-side sealing. The listed cable operating range is -20°C to 60°C.
Huijue Group can review OEM outdoor pigtails from a route drawing, cable schedule or customer connector sample. Fiber map, armor, gland transition, fan-out protection, labels and private-label packaging are subject to engineering review, test definition and minimum production conditions.
| Model Specification | Optical Cable Outer Diameter (mm) | Central Strength Member | Crushing Force (N/100mm) | Tensile Force (N) | Minimum Bending Radius | Weight (kg/km) | Operating Temperature (℃) | |||
| Short-Term | Long-Term | Short-Term | Long-Term | Dynamic | Static | |||||
| GYFTA (1+4-3.0) | 11.7 | 1.2mm Steel Wire | 1000 | 300 | 1040 | 690 | 20D | 10D | 95 | -20~60 |
| GYFTA (1+6-2.0) | 11.7 | 1.5mm FRP/2.1mm | 1000 | 300 | 530 | 350 | 20D | 10D | 80 | -20~60 |
| GYFTA (1+8-2.0) | 11.7 | 1.5mm FRP/3.3mm | 1000 | 300 | 620 | 410 | 20D | 10D | 93 | -20~60 |
| GYFTA (1+4-2.0) | 10 | 1.0mm Steel Wire | 1000 | 300 | 620 | 410 | 20D | 10D | 72 | -20~60 |
| Fiber Type | 62.5um (850/1300nm) | 50um (850/1300nm) | Single-Mode Fiber (SMF) (1310/1550nm) |
| Maximum Attenuation (dB/Km) | 3.75/1.5 | 3.5/1.5 | 0.75/0.5 |
| Typical Attenuation (dB/Km) | 3.5/1.5 | 3.0/1.0 | 0.4/0.3 |
| Minimum LED Bandwidth (MHz.km) | 160/500 | 400/800 | - |
Confirm solar exposure, moisture path, pulling load, bend radius, corrosion conditions and connector sealing at the site. The cable's stated temperature range does not by itself establish a waterproof rating for the complete terminated interface.
Buyer Questions
Answers specific to Outdoor Multifiber Pigtail Cable Assemblies selection, configuration and purchasing.
No IP rating is stated in the verified data. The connector, gland and enclosure entry need a complete sealing design.
Both steel-wire and FRP constructions appear in the listed models. The exact cable model must be selected against route and mechanical requirements.
They can be reviewed from a drawing, with sealing, strain relief and optical testing confirmed for the finished assembly.
Use the deployment context to narrow the configuration before comparing dimensions, capacities and options.
Match splitter or WDM architecture to wavelength plan, ratio, package and insertion-loss targets.
Coordinate connector, polish, fiber grade, polarity and cable length across patching points.
Plan MPO/MTP trunks and harnesses around port mapping, breakout format and rack density.
Select splicing, cleaning and test tools for the connector types and measurements used on site.
Before quotation: confirm capacity, interfaces, installation environment, power conditions, quantity and required options.