Passive optical distribution
Match splitter or WDM architecture to wavelength plan, ratio, package and insertion-loss targets.
A factory-terminated MPO/MTP trunk for high-density backbone cabling, configurable by fiber count, polarity, connector gender, loss grade and length.
Pre-Terminated MPO/MTP Trunk Cable consolidates multiple fibers into factory-finished MPO/MTP connectors for fast backbone installation between panels, cassettes or compatible equipment. It reduces field termination work and pathway volume where a defined high-density channel map can be approved before manufacture.
The current product record covers 8, 12, 24, 48 and 72 fibers, OS2, OM3, OM4 and OM5, male or female connectors and Type A, B or C polarity. Those variables are interdependent: a trunk is only usable when its pinning, key orientation and fiber map match every component at both ends.
Define fiber count and type, connector gender, key orientation, polarity, loss grade, cable structure, jacket and exact length. Supply a port-to-port map for every trunk. The verified product record for this page conflicts with the current trunk configuration, so only the current approved specifications should be used until a matching source drawing is confirmed.
Huijue Group can manufacture OEM or private-label trunks from an approved polarity drawing and label schedule. Customer samples can support compatibility checks. Ferrule grade, cable geometry, pulling protection, end-face test, length tolerance, quantity and tooling must be confirmed.
| Connector type | MPO/MTP to MPO/MTP |
| Fiber count | 8 / 12 / 24 / 48 / 72 fibers; optional |
| Fiber type | OS2 / OM3 / OM4 / OM5 |
| Connector end | MPO male / female option |
| Polarity | Type A / Type B / Type C |
| Optical grade | Standard-loss / low-loss option |
| Cable structure | Micro cable / ribbon / round cable |
| Jacket | LSZH / PVC option |
| Operating temperature | -20°C to +70°C |
The current record lists -20°C to 70°C operation. Protect the connector heads during pulling, control cable twist and verify every channel after installation. Use the jacket only in an approved pathway.
Buyer Questions
Answers specific to Pre-Terminated MPO/MTP Trunk Cable selection, configuration and purchasing.
MPO/MTP trunks carry many fibers. A wrong keying, gender or Type A/B/C map can misroute every channel even when the connectors mate.
No. Fiber mode and connector/end-face configuration are selected for the intended channel and equipment.
Yes, a private-label or project label schedule can be reviewed with the approved port map.
Use the deployment context to narrow the configuration before comparing dimensions, capacities and options.
Match splitter or WDM architecture to wavelength plan, ratio, package and insertion-loss targets.
Coordinate connector, polish, fiber grade, polarity and cable length across patching points.
Plan MPO/MTP trunks and harnesses around port mapping, breakout format and rack density.
Select splicing, cleaning and test tools for the connector types and measurements used on site.
Before quotation: confirm capacity, interfaces, installation environment, power conditions, quantity and required options.