Equipment rooms
Organize racks, pathways and service access around active network equipment.
An indoor aluminum-alloy routing tray using a 50 × 50 mm profile, with single or double layers and four documented route widths.
Single- and double-layer variants are listed at widths of 300, 400, 600 and 800 mm. The source states a load-capacity-per-metre figure of at least 300 kg. Its application requires confirmation of the support arrangement, connection details and load distribution for the selected assembly.
L2-Series Aluminum Cable Runway is an open support system for routing optical, communications and data cables through an equipment room. It gives the cable route a defined width and elevation while keeping the installed cables available for inspection and later changes.
The verified table identifies aluminum-alloy construction with a 50 × 50 mm profile. This distinguishes the product from other tray families that share a similar appearance but use different profile dimensions or loading references.
Confirm an approved load basis before selecting hanger spacing or using the published figure in a structural design.
For route-specific production, Huijue Group can review OEM labeling, private-label supply and tray details from samples or drawings. Changes to profile, supports or joints require engineering agreement on tooling, tests, quantity and delivery scope.
Submit a route plan with lengths, widths, elevations and layer count, together with cable loading, support spans, fixing method and accessory quantities.
| S/N | Model | NAME | Type | Application scenarios | Width (mm) | Cross-sectional dimension (mm) | Load capacity per meter (KG) |
|---|---|---|---|---|---|---|---|
| 1 | HJ ZXJ21-L2A3 | L2-Series Aluminum Cable Runway | Single-Tier | (indoor) | 300 | 50*50 | ≥300 |
| 2 | HJ ZXJ21-L2A4 | L2-Series Aluminum Cable Runway | Single-Tier | (indoor) | 400 | 50*50 | ≥300 |
| 3 | HJ ZXJ21-L2A6 | L2-Series Aluminum Cable Runway | Single-Tier | (indoor) | 600 | 50*50 | ≥300 |
| 4 | HJ ZXJ21-L2A8 | L2-Series Aluminum Cable Runway | Single-Tier | (indoor) | 800 | 50*50 | ≥300 |
| 5 | HJ ZXJ22-L2A3 | L2-Series Aluminum Cable Runway | Double-Tier | (indoor) | 300 | 50*50 | ≥300 |
| 6 | HJ ZXJ22-L2A4 | L2-Series Aluminum Cable Runway | Double-Tier | (indoor) | 400 | 50*50 | ≥300 |
| 7 | HJ ZXJ22-L2A6 | L2-Series Aluminum Cable Runway | Double-Tier | (indoor) | 600 | 50*50 | ≥300 |
| 8 | HJ ZXJ22-L2A8 | L2-Series Aluminum Cable Runway | Double-Tier | (indoor) | 800 | 50*50 | ≥300 |
| S/N | Name | unit | quantity | REMARK | |||
| 1 | Longitudinal Rail | m | 2 | When the length is 1 meter and the width of the cable runway is ≥ 800 mm, the middle position of the cable runway is increased by 1 main rail | |||
| 2 | Cross Member | Cables | 4 | The length is the width of the cable runway, and the interval is 250mm. | |||
| 3 | piece | Number of places | 0.1 | Ground support, the length meets the height of the machine room | |||
| 4 | Hanging | Number of places | 0.67 | Length meets machine room height | |||
| 5 | Installation Accessories | Sleeve | 1 | Other parts (including but not limited to reinforcements, fasteners, grounding wires, etc.) required for complete installation of the wiring rack | |||
| S/N | Name | unit | quantity | REMARK | |||
| 1 | Longitudinal Rail | m | 4 | When the length is 1 meter and the width of the cable runway is ≥ 800 mm, the middle position of the cable runway is increased by 1 main rail | |||
| 2 | Cross Member | Cables | 8 | The length is the width of the cable runway, and the interval is 250mm. | |||
| 3 | piece | Number of places | 0.1 | Ground support, the length meets the height of the machine room | |||
| 4 | Hanging | Number of places | 0.67 | Length meets machine room height | |||
| 5 | Installation Accessories | Sleeve | 1 | Other parts (including but not limited to reinforcements, fasteners, grounding wires, etc.) required for complete installation of the wiring rack | |||
| 6 | Inter-Tier Support Posts | Cables | 1.33 | Length is double interval, double interval column height ≥ 250mm |
Used for indoor machine-room routes, telecom-room cable distribution and organized overhead wiring around equipment rows.
The documented variants are indoor products. Include moisture conditions and support-surface details so finishes and connections can be assessed appropriately.
Buyer Questions
Answers specific to L2-Series Aluminum Cable Runway selection, configuration and purchasing.
This record specifies a 50 × 50 mm aluminum-alloy profile. Confirm that profile on the quotation rather than substituting dimensions from another tray page.
No. Hanger spacing depends on the complete support and joint arrangement, allowable deflection and cable distribution. Engineering review is needed for the final route.
Double-layer variants are listed. Define the separation objective, layer spacing and access requirements in the installation drawing.
Use the deployment context to narrow the configuration before comparing dimensions, capacities and options.
Organize racks, pathways and service access around active network equipment.
Coordinate cabinet capacity, cable routes, airflow and planned expansion.
Package network equipment within compact distributed infrastructure sites.
Add capacity while accounting for existing racks, routes and maintenance space.
Before quotation: confirm capacity, interfaces, installation environment, power conditions, quantity and required options.