Equipment rooms
Organize racks, pathways and service access around active network equipment.
A U-series metal-grid cable route for power and communications wiring, with field-formed direction changes and a project-defined support and fitting schedule.
U-Series Wire Mesh Cable Tray is a grid-style cable tray for power and communications cable placement. The open mesh allows visibility of the route and leaves the cable bundle exposed to room air rather than enclosing it inside a solid trough.
The source identifies a U-series grid product ordered by metre. Supports, hangers, connection parts and route accessories need to be specified from the installation drawing so that the supplied length can be assembled into a complete supported route.
Confirm width, height, finish and cable loading before selecting a route. Field-forming a bend still requires suitable reinforcement and treatment of cut ends. Identify tees, crossings, vertical transitions and equipment drops, then prepare the support and bonding schedule for those details.
For grid bridge projects, Huijue Group can review OEM identification, private labeling and sample- or drawing-based fittings. Wire form, joints and support alterations require engineering agreement on tooling, tests, quantity and delivery scope.
Send metre quantities, tray dimensions, cable load, support spans, finish, drop-outs, bends, crossings, cut-end treatment and bonding requirements.
| S/N | Product Name | Specification and model description |
|---|---|---|
| 1 | U-Series Wire Mesh Cable Tray | Order by meter |
| 2 | Offline board | Grid bridge off-line board, configured according to order |
| 3 | Other accessories | |
| 3.1 | Rear support | Including fixed rung accessories, estimated at 1.2 m/place |
| 3.2 | Hanging screw | 2 m M16 screw with hanging fittings, estimated at 1.2 m/place |
| 3.3 | Nut | 8 matching nuts per hanger |
| 3.4 | Reinforcement bar | 2 sets per 3-meter grid bridge; |
| 3.5 | Snap KK34 | 3 sets per 3m grid bridge |
| 3.6 | Expansion bolt | M10-70 expansion bolts with 4 bolts every 5 meters |
| 3.7 | Ground copper bolt 5mm | 1 per 10m grid bridge; |
| 3.8 | Curved Connecting Strip (100 Height) | One three-way with 2, one four-way with 4, according to the actual configuration |
| 3.9 | Turning reinforcement strip | a 90-degree elbow with a |
| 3.10 | Blank cap | Caps, end plugs, accessories included, estimated at 10 m/place |
For power and communications cable routes where open access and visible wiring are appropriate to the room design.
Select the material finish and exposure conditions explicitly. This record does not establish an environmental rating or universal load figure for every route geometry.
Buyer Questions
Answers specific to U-Series Wire Mesh Cable Tray selection, configuration and purchasing.
The source describes on-site formation. Agree the approved forming method, reinforcement, edge protection and finish repair for the selected mesh.
Supports and other accessories appear separately in the source schedule. Confirm their quantities and supply scope against the actual route plan.
Use the deployment context to narrow the configuration before comparing dimensions, capacities and options.
Organize racks, pathways and service access around active network equipment.
Coordinate cabinet capacity, cable routes, airflow and planned expansion.
Package network equipment within compact distributed infrastructure sites.
Add capacity while accounting for existing racks, routes and maintenance space.
Before quotation: confirm capacity, interfaces, installation environment, power conditions, quantity and required options.