Core equipment rooms
Coordinate DC power, distribution, batteries and monitoring around communications loads.
HJDZY048-1000W compact 1 kW outdoor supply with a 220 V AC interface, 48 V DC distribution and wall or pole installation.
The unit lists one 220 V AC input and three 40 A, 48 V DC output interfaces. Surge protection is described on both incoming and outgoing paths. The enclosure carries a documented IP65 rating and a top profile intended to avoid water accumulation.
The Outdoor AC/DC Power Supply provides a compact conversion and distribution point for micro-cell and similar communications loads. Model HJDZY048-1000W integrates the power board, AC/DC distribution and surge protection in a die-cast aluminum enclosure, with a documented 1000 W capacity.
At 280 × 200 × 80 mm and no more than 4 kg, it suits projects where a full power cabinet would occupy unnecessary space. Natural heat dissipation and wall/pole installation allow the supply to be positioned near equipment, provided cable and mounting requirements are checked.
Use the 1000 W capacity as the total-load starting point. Three 40 A interfaces do not increase the converter's total power. Confirm load startup demand, output polarity, input protection and cable/connector arrangement before installation.
Huijue Group can review OEM labels, private-label packaging and wall/pole accessories based on drawings or a supplied sample. Connection or housing changes require engineering confirmation of feasibility, tooling, electrical and sealing tests, production quantity and delivery scope.
Send the connected load in watts, startup current, 220 V AC service details, required DC branches, connector type, pole/wall dimensions and exposure conditions.
| Model | HJDZY048-1000W |
|---|---|
| Capacity | 1000W |
| Dimensions | 280*200*80(mm) |
| Weight | ≤4kg |
| Input interface | 1 × 220Vac |
| Output interface | 40A*3, 48Vdc |
Confirm installation temperature, solar exposure and convection clearances. Retain the required weather sealing at all cable interfaces and use a bracket suitable for the actual mounting surface.
Buyer Questions
Answers specific to Outdoor AC/DC Power Supply selection, configuration and purchasing.
The unit is a 1000 W supply. The listed interface ratings do not override that total capacity; engineering should review the simultaneous branch load.
This model is a small 1 kW conversion/distribution unit with a 280 × 200 × 80 mm enclosure. A project needing a large battery compartment, more capacity or extensive site equipment requires a different system arrangement.
Use the deployment context to narrow the configuration before comparing dimensions, capacities and options.
Coordinate DC power, distribution, batteries and monitoring around communications loads.
Use integrated or wall-mounted systems where equipment space is limited.
Match generation, storage and power conversion to load and autonomy requirements.
Combine grid, solar, battery or generator inputs around a defined operating strategy.
Before quotation: confirm capacity, interfaces, installation environment, power conditions, quantity and required options.