Passive optical distribution
Match splitter or WDM architecture to wavelength plan, ratio, package and insertion-loss targets.
A portable fiber maintenance kit combining optical-loss test, visible fault-location and connector end-face cleaning tools for field service work.
The Optical Network Maintenance Tool Kit brings the basic instruments and consumables needed for routine fiber-link inspection into one portable case. The listed set includes the OLS-85 light source, OLP-85 power meter, FFL-100 visual fault locator, an electric cleaning pen, cleaning cloth, and project-selected reference jumpers and adapters.
It is intended for technicians who need to check link loss, locate visible breaks and clean connector end faces without assembling a separate tool set for every visit. It is a maintenance package rather than a substitute for a complete acceptance-test plan; the required wavelengths, connector interfaces and reference method must be defined for the network being serviced.
Match the kit to the links technicians will encounter. Confirm single-mode or multimode fiber, test wavelengths, connector and polish types, required adapter heads, and whether the work is troubleshooting, preventive cleaning or documented loss measurement. The published working range is -5°C to 40°C; storage and transport are listed at -10°C to 40°C.
Huijue Group can review OEM or private-label kit composition, case labeling and accessory schedules. Customer samples or an approved tool-and-interface drawing can be used to check fit and completeness; instrument substitutions, calibration scope, quantity and delivery package remain subject to engineering and commercial confirmation.
| Serial No. | Name | Model |
| 1 | Handheld Light Source | 0Ls-85 |
| 2 | Handheld Power Meter | 0LP-85 |
| 3 | Electric Cleaning Pen | Main Unit |
| 4 | Accessory 1 - Cleaning Rod | |
| 5 | Accessory 2 - Adapter Head | |
| 6 | Visual Fault Locator (VFL) | FFL-100 |
| 7 | K1M Cloth | 45×45(mm) |
| 8 | Toolbox | Portable Toolbox |
| 9 | Standard Jumper | As Required |
| Standard Adapter | As Required |
Operating Temperature: -5~40℃
Storage and Transportation Temperature: -10~40℃
Use and store the instruments within their listed temperature limits. Keep reference connectors capped and clean, and establish the same reference method at both ends before comparing loss readings. Final kit contents should be checked against the site's connector inventory.
Buyer Questions
Answers specific to Optical Network Maintenance Tool Kit selection, configuration and purchasing.
Yes. The listed kit allows project-selected jumpers and adapters; provide the connector, polish and fiber types so the proposed contents can be checked.
No. It supports basic power, loss, visible-fault and cleaning work. OTDR testing requires a separate instrument and an appropriate test procedure.
Huijue Group can review case and label artwork for an OEM or private-label order, subject to approved artwork, quantity and production feasibility.
Use the deployment context to narrow the configuration before comparing dimensions, capacities and options.
Match splitter or WDM architecture to wavelength plan, ratio, package and insertion-loss targets.
Coordinate connector, polish, fiber grade, polarity and cable length across patching points.
Plan MPO/MTP trunks and harnesses around port mapping, breakout format and rack density.
Select splicing, cleaning and test tools for the connector types and measurements used on site.
Before quotation: confirm capacity, interfaces, installation environment, power conditions, quantity and required options.