Passive optical distribution
Match splitter or WDM architecture to wavelength plan, ratio, package and insertion-loss targets.
An electric connector-cleaning tool with replaceable rods for 1.0, 1.25 and 2.5 mm fiber interfaces and field end-face maintenance.
This powered fiber optic connector end-face cleaner is designed to remove dry contamination from fiber connector end faces through a powered rotating cleaning action. Interchangeable rods address 1.0 mm interfaces on selected products, 1.25 mm LC and MU interfaces, and 2.5 mm FC, SC and ST interfaces, including UPC and APC connector formats where the matching rod is selected.
The tool is useful when a manual inspection-and-cleaning workflow identifies contamination that ordinary dry wiping does not remove. Connector geometry still matters: the correct rod and adapter head must be used, and the end face should be inspected before and after cleaning rather than cleaned repeatedly without verification.
Specify the ferrule diameter, connector family, UPC or APC geometry, and whether the target is a plug, jack or recessed port. The documented operating range is -10°C to 40°C and storage range is -20°C to 40°C. Cleaning-life figures apply to the stated rods and should be treated as planning values, with actual replacement based on rod condition and procedure.
For service programs, Huijue Group can review a private-label cleaning set with selected rods, adapter heads and consumable quantities. Sample-based interface checks and drawing-based holder or packaging work are possible only after engineering review; tooling, fit, test method and production quantity must be confirmed before manufacture.
CC Operating Temperature: -10℃—40℃; Storage Temperature: -20℃—40℃
CC can clean 1.0mm interfaces: pins and jacks of some 1599 products
CC can clean 1.25mm interfaces: LC, MU (UPC/APC)
CC can clean 2.5mm interfaces: FC, SC, ST (UPC/APC)
The service life of CC 1.0mm cleaning rod can reach 30 cleanings
The service life of CC 1.25mm cleaning rod can reach 50 cleanings
The service life of CC 2.5mm cleaning rod can reach 100 cleanings
CC can also be freely configured according to individual needs
Keep rods clean and protected between uses. Confirm that no liquid or abrasive process is required by the connector manufacturer, and never force an incorrectly sized adapter into a port. Operate only within the documented temperature range.
Buyer Questions
Answers specific to Powered Fiber Optic Connector End-Face Cleaner selection, configuration and purchasing.
The current data lists 1.25 mm LC/MU and 2.5 mm FC/SC/ST interfaces, plus selected 1.0 mm products. The exact rod and adapter must be matched before use.
No. Ferrule size, connector housing and access depth differ, so the appropriate replaceable rod and adapter head are required.
Yes, the requested connector list or samples can be reviewed for a tailored set, but interface fit and final contents require confirmation.
Use the deployment context to narrow the configuration before comparing dimensions, capacities and options.
Match splitter or WDM architecture to wavelength plan, ratio, package and insertion-loss targets.
Coordinate connector, polish, fiber grade, polarity and cable length across patching points.
Plan MPO/MTP trunks and harnesses around port mapping, breakout format and rack density.
Select splicing, cleaning and test tools for the connector types and measurements used on site.
Before quotation: confirm capacity, interfaces, installation environment, power conditions, quantity and required options.